Origin

China

Vacuum closed circuite pressure blast machine consists of pressure blast machine with remote control, blast hose,blast head assembly, reclaimer and vacuum pump recovery system, dust collector and cart. it is widely used fordescaling, surface texturing, and paint preparation, mainly used to clean bigger components, like steel structure,bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, andvacuum pump generated recovery system makes it to be used without dust and disposal problem. Features: 1. automatically recover and recycle the abrasive without stoping to refill, reduce the abrasive consumption,eliminate sweeping and minimize abrasive disposal costs. 2. two vacuume pumps fitted to recovery reduce the air consumption, easy load new or resuable abrasive media,and easy recovery expendable abrasive media for disposal. 3. adopt pressure-hold pneumatic remote control, keeping the blast machine under pressure but allow the operatorto start and stop blasting as frequently as needed. The machine is pressurized and depressurized manually, and theremote control handle controls the on/off of the abrasive and air independently. 4. Closed circuit blast gun fitted with boron carbide nozzle dia 6.4mm, 7.9mm, 9.5mm, 11.1mm to customersrequire. 5. reverse pulse cartridge dust collector, dust cleaning during blasting operation by automatic electric control. 6. It can be used as a normal portable pressure sand blasting machine only or a vacuum recovery only. Model: ERB-YIII Compressed air sourc: 0.6 ~ 0.7 MPa, 2.2 m3/min Vacuum Pump: 2 x 4.4kw, 2 x 300 m3/min, 20KPa Blasting capacity: 6-15 m2/h, with nozzle dia 6mm. Blast Cleaning: Sa 2.5 ~ Sa 3.0 Pressure vessel capacity: 110 liters Approx Transfer tank: 110 liters Approx Nozzle: boron carbide, dia 6.4mm, 7.9mm, 9.5mm, 11.1mm. Operating hose supplied: dia 32mm x 10 meter Abrasive loading capacity: Approx 490kg metal abrasive. 215kg artificial corundum. Blast cycle: 15 ~ 30 minutes Recommend media: Aluminium Oxide, garnet: #24 ~ #220 Glass-Beads: 45/85 ~ 600/800 micron Chilled steel: G50 ~ G25 Dimensions: 2000 x 930 x 2000 mm (W x D x H) Weight: 600kg Approx.

closed circuite suction blast machine consists of suction blast machine with remote control, blast hose, blast head assembly, cycloner reclaimer and pneumaticlly generated abrasive recovery system, dust collector and cart. it is widely used for descaling, surface texturing, and paint preparation, mainly used to clean rust removing at oil field, container renew, etc, and pneumaticlly generated abrasive recovery system makes it to be used without dust and disposal problem. Features: 1. automatically recover and recycle the abrasive without stoping to refill, reduce the abrasive consumption, eliminate sweeping and minimize abrasive disposal costs. 2. pneumaticlly generated abrasive recovery system for easy loading new or resuable abrasive media, and easy recovery expendable abrasive media for disposal. Spent abrasive dust and debris is recovered continuously and reuseable abrasive is recycled to the gun. 3. adopt suction blast system allow the operator to start and stop blasting as frequently as needed. 4. closed circuit blast gun fitted with boron carbide nozzle dia 6.4mm, 7.9mm, 9.5mm, 11.1mm to customers require. 5.Integral dust collector to trap dust and fines for acceptable dust emission. 6. It can be used as a normal portable suction sand blasting machine only or a vacuum recovery only. 7. Total comressed air powered, no need electric supply. 8. available with different brushes. Model: ERB-XI Operating pressure: 0.6 ~ 0.7 MPa Air consumption: 2.2 - 6 m3/min Power consumption: Compressed air only Abrasive storagehopper: 80 liters Approx Operting hose length: 5 meter max Blast cleaning: Sa2.5-Sa3.0 Process capacity: 1-4m2/h Blast cycle: Continuous Recommend media:BFA: 20-200#, steel grt: 0.6mm max Dimension: 1500 x 800 x 1400mm